Filter
Top Products
125
This camera recorder is equipped with an AUX input terminal
on the side for recording composite video signals from an
external device to an SDHC card.
Memo :
●
[Favorites Menu]
does not function in AUX mode.
1
Set the camera recorder to Camera mode.
2 Set the [GENLOCK/AUX] switch to AAUXB.
The [Record Format] menu settings are as follows. (
A
Page 75)
3 Set the following items in the [Record Format] menu.
(A Page 75)
● Select the format for recording to the SDHC card in
[File Format] (AQuickTimeB or AAVIB).
● Set the [Aspect Ratio].
4 Set [Set Up] in the [A/V Out] menu. (A Page 92)
5 Input composite video signals from the external
device to the [GENLOCK INPUT] terminal.
Note :
● Input jitter-free composite video signals.
Input level : 1.0 ± 0.3 V (p-p)
6 Start/Stop recording using the [REC] button on the
camera recorder.
The EE image of the input signal is output in the SD (DV)
format from the respective video output terminals.
Note :
● During recording of external video signals, checking of the
recording (Clip Review) cannot be performed using the
[RET] button on the lens.
● Do not touch the [GENLOCK/AUX] switch while recording
is in progress.
Ⅵ Status Screen Display in AUX Mode
In the AUX mode, AAUXB is displayed on the status screens
of the LCD monitor and viewfinder.
Input of Composite Video Signals
from External Device (GY-
HM790CHU/GY-HM790U only)
[System Definition] Item : SD (DV)
[Camera Resolution] Item : 720 x 480
[Frame Rate] Item : 60i
A
16:9
B
:
When the input analog signal is a squeeze signal
A
4:3
B
:
All cases other than that stated above
A
7.5%
B
:
When input analog signals include setup signals
A
0.0%
B
:
When input analog signals do not include setup signals
[GENLOCK/AUX] Switch
[GENLOCK/AUX IN]
Terminal
00:00:00:00
STBY
100min
100min
720x480
60i AUX
B
A
282min
DD
DF
FREE
A
B
123 min
min
OK
720x480
60i AUX
CH1
CH2
STBY
100min
67.8min
DD
AAUXB Display
AAUXB Display
Status Screen
Enlarged Status Display Screen