Filter
Top Products
137
General
Camera Section
Lens Section (GY-HM790U/GY-HM790E only)
Storage Section
Symptom Action
The date and time are not displayed. ● The date and time are only displayed on the STATUS 2 and STATUS 3
screens in the Camera mode (during shooting). (A Page 106, 107)
No output from the [Y/VIDEO], [PB], and
[PR] video signal output terminals.
● Is [Output Terminal] in the [A/V Out] menu correctly set? (A Page 92)
Incorrect display on the viewfinder. ● Is the LCD monitor used with [LCD + VF] in the [LCD/VF] menu set to AOffB?
(A Page 88)
IEEE1394 connection between the camera
recorder and the external device cannot
be established (e.g., no image on the
camera recorder and/or external device).
● Is the operation mode correctly set? (A Page 8)
● Is the [INT/EXT] IEEE1394 interface terminal switch correctly set?
●
Is [System Definition] in the [Record Format] menu correctly set? (
A
Page 75)
● Check the connection, such as by removing the IEEE1394 cable and inserting
it again, or by reconnecting the power.
When the camera recorder is in the Media
mode (SD Card mode), pressing the
[CAM/MEDIA] button does not switch it to
the IEEE1394 Input mode.
● Is the power of the device connected to the [IEEE1394] terminal turned ON?
If the power of the connected device is OFF, the camera recorder does not
switch to the IEEE1394 Input mode.
●
Is [System Definition] in the [Record Format] menu set to
A
SD (DV)
B
? (
A
Page 75)
When the SD video system is in use, the camera recorder is unable to
recognize the IEEE1394 connection in the Media mode (SD Card mode).
Turn ON the power of the IEEE1394-connected device in the Camera mode,
followed by switching from the Media mode (SD Card mode) to the IEEE1394
Input mode using the [CAM/MEDIA] button.
Specifications
Power : DC 12 V (10.5 V to 17 V)
Power
consumption
: Approx. 26 W
(During recording [when the camera
recorder + standard lens + LCD monitor
are in use])
Mass
GY-HM790CHU : Approx. 2.7 kg
GY-HM790CHE : Approx. 2.8 kg
GY-HM790U : Approx. 3.7 kg
GY-HM790E : Approx. 3.9 kg
Allowable
operating
temperature
: 0 f to 40 f (32 J to 104 J)
Allowable
operating
humidity
: 30 % RH
Allowable storage
temperature
: -20 f to 60 f (-4 J to 122 J)
Image pickup device : 1/3" Progressive IT CCD
Color separation
prism
: F1.4, 3-color separation prism
Sync system : Internal sync (built-in SSG)
Lens mount : 1/3" bayonet system
Optical filter : OFF, 1/4, 1/16
Gain : 0dB, 3dB, 6dB, 9dB, 12dB, 15dB, 18dB,
ALC
Electronic shutter : 1/6 to 1/10000, EEI
Variable frame : 10/30-60/30fps, 10/25-50/25fps, 10/24-
60/24fps
LCD monitor : 4.3" LCD, 800 x 480
(WVGA, 410,000 pixels)
Viewfinder : 0.45" LCOS, 1.22 megapixels
(852 x 480 x 3)
Lens : Canon F/1.6, 14x, f = 4.4-61.6 mm
(35 mm conversion: 32-448 mm)
Filter diameter : 82 mm
Supported media : SDHC (Class 6/10)
Slots : x 2