Filter
Top Products
92
Menu Display and Detailed Settings
* Default values are indicated in bold characters.
A/V Out Menu
Item Setting Values Function
Output Terminal
Composite
Component
Off
For setting output signals from the [Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on
the side of the camera recorder.
Composite : Outputs composite signals to the [Y/VIDEO] video signal output terminal.
Component: Outputs component signals.
Off : Signals are not output.
Set Up
7.5% (U model)
0.0% (E model)
For selecting whether to add a setup signal to the video signal output from the [Y/VIDEO]/[PB]/
[PR] video signal output terminal (BNC) on the side of the camera recorder.
A setup signal can also be selected during signal input from the [IEEE1394] terminal.
7.5% : Adds setup signal.
0.0% : Setup signal is not added.
Memo :
● When [Frame & Bit Rate] is set to A50p (SP)B, A50p (HQ)B, A50i (SP)B, A50i (HQ)B, A25p
(SP)B, or A25p (HQ)B, this item appears as A---B and cannot be selected. (A Page 75)
● Depending on the menu settings of the camera recorder and the condition of the cable
connected to it, the setup signal setting may be fixed at A0.0%B. A0.0%B is displayed in gray in
this case.
HD/SD-SDI Out
HD-SDI
SD-SDI
Off
For specifying whether to output SDI signals from the [HD/SD-SDI] output terminal on the side of
the camera recorder.
HD-SDI : Outputs HD-SDI signals. Embedded (superimposed) audio signals and the time
code are also output.
SD-SDI : Outputs SD-SDI signals down converted from HD. When [System Definition] in the
[Record Format] menu is set to AHD (MPEG2)B (A Page 75), SD-SDI signals
down converted from HD are output. Embedded (superimposed) audio signals and
the time code are also output.
Off : SDI signals are not output.
Memo :
● When [System Definition] in the [Record Format] menu is set to ASD (DV)B, AHD-SDIB cannot
be selected. Only SD-SDI signals are output. (A Page 75)
●
When DV signals are input from the [IEEE1394] terminal,
A
HD-SDI
B
cannot be selected.
● User’s bit output from the [HD/SD-SDI] output terminal is used as a flag to determine valid
video signals. Therefore, accurate values will not be output.
Down Convert
Side Cut
Letter Box
Squeeze
For setting the style of displaying down-converted images on a 4:3 aspect ratio screen. This
setting applies to all Composite/SD-SDI/DV outputs.
Side Cut : Displays image with the left and right sides cut off.
Letter Box : Displays as a wide image with the top and bottom blackened.
Squeeze : Displays image that is squeezed horizontally.
Memo :
● When [System Definition] in the [Record Format] menu is set to ASD (DV)B, this item appears
as A---B and cannot be selected. (A Page 75)
Analog Out Char.
On
Off
For selecting whether to display status and menu characters on the screen output from the
[Y/VIDEO]/[PB]/[PR] video signal output terminal (BNC) on the side of the camera recorder.
On : Turns on display.
Off : Turns off display.
Memo :
● When [Analog Out Char.] is set to AOnB, the details shown on the viewfinder are also
displayed in the image output from the video signal output terminal (BNC).
SDI Out Char.
On
Off
For selecting whether to display status and menu characters on the screen output from the
[HD/SD-SDI] output terminal on the side of the camera recorder.
On : Turns on display.
Off : Turns off display.