Filter
Top Products
30
Preparations
Displays on the LCD Monitor and
Viewfinder Screens
Ⅵ When [LCD + VF] in the [LCD/VF] Menu
is Set to AOffB (A Page 88)
Displays on the LCD monitor and viewfinder screens (VF)
are indicated as below.
Memo :
● Press and hold the [DISPLAY] button for 2 seconds to
switch the display between the LCD monitor and
viewfinder screens.
● The function to switch between LCD monitor and
viewfinder displays by pressing the [DISPLAY] button can
be canceled by opening/closing or rotating the LCD
monitor.
● When the LCD monitor is stored in the camera recorder in
the direction of normal display, pressing of the [DISPLAY]
button will not work.
● You can display both the LCD monitor and viewfinder
screens at the same time by selecting [LCD + VF] in the
[LCD/VF] menu. (A Page 88)
Ⅵ When [LCD + VF] in the [LCD/VF] Menu
is Set to AOnB (A Page 88)
Displays on the LCD monitor and viewfinder screens (VF)
are indicated as below.
Memo :
● Press and hold the [DISPLAY] button for 2 seconds to turn
ON/OFF the LCD monitor screen.
● The function to turn ON/OFF the LCD monitor screen by
pressing the [DISPLAY] button can be canceled by
opening/closing or rotating the LCD monitor.
● The viewfinder screen is always displayed.
These are indicator lamps for recording and warning. The
operation changes according to the menu settings. When the
battery or remaining space on the SDHC card is low, the
lamps blink. (Camera mode only)
Set using [Tally System]/[Front Tally]/[Back Tally] in the [Main
Menu] B [Others] menu. (A Page 94)
Adjusting the LCD Monitor
and Viewfinder (continued)
LCD Monitor Status LCD Display VF Display
Closed LCD Normal LCD OFF ON
Inversed LCD ON OFF
Opened LCD Normal LCD ON OFF
Inversed LCD ON OFF
[DISPLAY] Button
Normal LCD
Inversed LCD
LCD closed at 40
degrees and below
LCD opened at
40 degrees
and above
LCD Monitor Status LCD Display VF Display
Closed LCD Normal LCD OFF ON
Inversed LCD ON ON
Opened LCD Normal LCD ON ON
Inversed LCD ON ON
Tally Lamps
Back Tally Lamp
Front Tally Lamp