Filter
Top Products
VI Basic Operations NETWORK
4 Using the DS-L1 via a Network
- 91 -
6) Select [Advanced]. If [Advanced] is disabled and you cannot select it, left-click on [Use a
Proxy Server] first. A check mark will be displayed, allowing you to select [Advanced].
7) In the [Exceptions] column, write the IP address of the DS-L1. (Refer to “4.2.2 Setting
Essential Items” in Chapter VI for details on the IP address of the DS-L1.)
• Enter a period after every three digits of the IP address.
• If the first digits of the IP address are “00” or “0,” do not enter the zeros.
8) Click [OK].
Move the pointer “↑” to the position of [OK] and left-click on it. Repeat this until the
screen returns to the one from step 1.
Left-click here.
Enter the IP address here.
(Example: When entering
the IP address “192.168.1.2.”)