Filter
Top Products
VI Basic Operations NETWORK
4 Using the DS-L1 via a Network
- 87 -
4.2.2 Setting Essential Items—Network Settings
In this instruction manual, explanation are given assuming that the IP address of the DS-L1 is
192.168.10.2, that of the server is 192.168.10.1, and that of the subnet mask is 255.255.0.0.,
while the gateway address is 192.168.128.1.
Of course, you should use the IP address assigned to you by your network administrator.
We must assume that network settings on the PC side (LAN connection) are complete.
Please consult your network administrator for details.
Network settings of the DS-L1
If you are going to connect the DS-L1 to a LAN, you need to enable it for network operation and
set its own address.
To make network settings on the DS-L1, select Network Settings from the SETUP menu to call
up the Network Settings screen shown below.
Enable Network
To use a network, always select this check box.
Read Only (FTP, WEB : disable Write/Control)
This is to disable writing to the internal files of the DS-L1 when it is operated using a WEB
browser or FTP command. When this check box is selected, you cannot write to the
internal files.
Unselect this check box to control the DS-L1 and write to internal files via a network
connection.
If you only want to get images from the DS-L1, leave this check box selected.
Enables/disables
network o
p
eration.
Sets the IP address of the
DS-L1.