Filter
Top Products
.CAMERA. VI Basic Operations
2 Photographing Images
- 42 -
(1) Choosing scene mode and custom mode
Choose a scene mode that suits the subject and the method of observation.
Scene mode
To change the scene mode for industrial or biological specimens, use Cam OSD on Power
On Settings as selected from the SETUP menu.
• Industrial specimen scene mode: Ind.
• Biological specimen scene mode: Bio.
NOTE: The scene mode setup values can also be set and saved as desired.
Instructions on how to store the set values in memory are given in the
description of the Advn. menu.
• Industrial specimen scene modes
(Wafer IC-chip):
Wafer or IC chip
(Metal Ceramic):
Bright parts of a metal specimen are expressed as white, and dark
parts are expressed as transparent. This mode can also be used for
ceramic and plastic specimens.
(Circuit Board):
This mode is suitable for photographing mounting defects on a
part-mounted circuit board.
Clipping of highlights in component leads and solder joints are
suppressed, allowing for defects to be easily detected. This mode is
also suitable for high-contrast subjects such as gears and other metal
components.
• Biological specimen scene modes
(DF/FL): Dark field photography/fluorescent photography
Use this mode to photograph a dark subject. The camera operability
for position or focus adjustment is improved by increasing the
camera’s sensitivity.
High-resolution images may be obtained from the photographed data.
(BF): Bright field photography
This mode is provided for general dyed specimens.
(DIC/PH):
Contrast is enhanced for differential interference and phase contrast
photography purposes.