Filter
Top Products
VI Basic Operations MICROSCOPE
6 Using the Microscope Control
- 151 -
<To set the microscope for user setup microscopy>
Before using a specific observation method, you must register it in the microscope. To register
the setting, use the appropriate software installed on the PC connected to your microscope. For
more information on registering, refer to the user's manual for the application. If the names of
observation methods are also registered along with their settings, moving the cursor to one of
the icons representing those numbers will display the name of the observation method under the
cursor in the Info box.
<To link the observation method with the photographing mode of DS-L1>
1) Right-click on the icon indicating an observation method to open the menu showing all
observation methods.
2) Enter a check mark in the check box.
6.2.4 Ergo Controller button information display menu
To view button assignments on the Ergo Controller, press the [?] button on the Ergo Controller.
Compatible only with Nikon 90i microscopes connected to the Ergo Controller.
NOTE:
* Tab toggles back and forth between detailed settings for functions A and B.
* This menu cannot be used to control the Ergo Controller or microscope.