Filter
Top Products
VIII Troubleshooting
6 USB
- 165 -
• When connected to a
PC, DS-L1 is recognized
not as a storage unit
but as some other
device, such as a
camera.
• There may be a possibility that PictBridge-supporting printer is selected
in Additional Settings screen in the SETUP menu. Select the selection
mode for Mitsubishi DP900D printer, using "1.4.5 Settings for Direct
Print" as a reference.
Unable to print with a
PictBridge-supporting
printer.
• The printing icon for
PictBridge , does
not show.
• Confirm that PictBridge-supporting printer is selected in the Additional
Settings screen in the SETUP menu.
• Unable to click the
printing icon.
• Confirm that a PictBridge-supporting printer is connected to the USB-D
connector on DS-L1.
• Confirm that the power for the PictBridge-supporting printer is turned
on. In the case that it is still unable to click the printing icon even
though the power is turned on, close the menu, turn on and off the
power once more, then display the menu again.
• A [PRINTER ERROR!]
message is displayed
during printing.
• Check the paper and ink supplies as well as other conditions required
for normal printing. Restore the printer to the normal status by
referring to the manuals for the printer you are using, and then display
the menu to perform the printing.