Filter
Top Products
.USB. VI Basic Operations
5 Using the DS-L1 when Connected to a PC by a USB Cable
- 130 -
5.4.5 Removing the DS-L1 from the PC
Because the DS-L1 is connected via a USB interface, it can be removed from the PC even while
the PC remains powered on. However, to prevent data from being corrupted while removing the
DS-L1 during a write operation, follow the procedure described below.
1) Eject the media from the media drive before removing the DS-L1.
2) Click the “Safe to Remove Hardware” icon on the task bar.
3) Drives should be selected one at a time. First, select the media drive. If the media drive
can be removed, the message shown below is displayed.
4) To remove the CCD image drive, follow step 3.
5) Unplug the USB cable or turn off the DS-L1.
Plug in the USB cable and turn on the DS-L1. It will be recognized by the PC again.