Filter
Top Products
.NETWORK. VI Basic Operations
4 Using the DS-L1 via a Network
- 110 -
4.6.2 Setting External Servers of the DS-L1—Network Settings
Consult the network administrator in your organization for details on the FTP server.
If you are going to connect the DS-L1 to a LAN, you need to enable it for network operation and
set its own address.
Setting the FTP client function
To set the FTP client function of the DS-L1, select Network Settings from the SETUP menu to
call up the Network Settings screen shown below.
Enable FTP Client
For image files to be sent to the FTP server, always select this check box to enable the FTP
client function.
External Server
Set the IP address and the gateway address of the server PC. (Before images can be sent
to any FTP server that belongs to a different network group, you must enter the gateway
settings.)
Server No. Five servers can be stored in memory. Assign each server a number.
IP Address 192 168 010 001 ←Input example
User ID Enter a user ID that is needed to log in to the server.
Pass Word Enter a password that is needed to log in to the server, as necessary.
Gate Way 192 168 128 001 ←Input example
If any entry in the IP address consists of two digits or one digit, add “0” or “00” at
the beginning of it to make each entry consist of three digits as you enter.
Click the input box and enter an address value. If you missed entering any address value,
hold down skip on the screen keyboard while you skip to the last entry of the address,
then enter the correct value again.
When you finished setting all, press SAVE to save what you’ve set.
The server with the number you last saved is selected when the DS-L1 starts up.
Sets the IP address of
the DS-L1.
Enables/disables network
operation.