Filter
Top Products
.MICROSCOPE. VI Basic Operations
6 Using the Microscope Control
- 150 -
Optical zoom <Shows the optical zoom magnification>
Compatible only with microscopes incorporating the DIH.
1
）
If the camera head is connected to the rear port of the DIH, the menu indicates the
magnification in the optical zoom column
for the current optical zoom incorporated in
the rear port of the DIH.
NOTE:
* Use microscope control menu 1 to change the magnification of the optical
zoom.
* If the
checkbox on microscope control menu 1 is checked,
zoom magnifications will not be displayed. If the camera head is connected
to the rear port of the DIH, make sure the checkbox is unchecked.
Filter <Shows filter name>
Compatible only with microscopes incorporating the DIH.
1
）
The menu indicates the name of the current filter in the filter column .
NOTE:
* Before using this function, you must set up filter information from a PC with
the setup software. For more information, refer to the instruction manual
for your microscope.
* Use microscope control menu 1 to change filters.
Observation method <Sets the observation method>
If the microscope connected is a Nikon 90i microscope incorporating the DIH-E, you can use one
of the Nikon-specified default observation methods.
1） Select the icon representing your desired observation method to change microscope
settings for this observation method.
2） The icon representing the current observation method will be marked with a red border.
NOTE:
* The default observation method on startup is "BF."
* Right-click on any icon representing an observation method to display the
names of all observation methods. You also can select the desired
observation method from within this display to change observation
methods.