Filter
Top Products
26 C1695M-B (11/08)
• Press Enter [Enter/Shift or ]. The DVR5100 main application window opens.
NOTE: As a security precaution, change the user ID for autologin as part of the configuration and setup process. From the General System setup
screen, select the guest user ID, or create a new user ID, as the default autologin user. Either of these user IDs will have limited permissions,
preventing unauthorized access to system settings.
MAIN APPLICATION WINDOW
The first time you log on to the DVR5100, the main application window opens up in one of the following configurations:
• DVR5104 (4 channel): 2 x 2 layout
• DVR5108 (8 channel): 3 x 3 layout
• DVR5116 (16 channel): 4 x 4 layout
If you have a 4-channel unit, the main application window opens in a 2 x 2 configuration. In Figure 22, the upper-left video pane is selected (live
view mode). In this mode, you can choose any camera to display in the video pane.
Figure 22. Quad View
SHUTTING DOWN THE DVR5100
Use the following steps to shut down the DVR5100. For security purposes, you can shut down the DVR5100 only if you have Administrator level
permissions.
1. From the Login screen, select the admin user ID, and then enter the appropriate admin password.
2. Select Shut Down to power off the system.
NOTE: If you are already logged on, use the on-screen menus to log off and follow the steps above. The DVR5100 saves all configuration
information and recorded video, and then shuts down.
Table G. Default User IDs and Passwords
User ID admin manager operator guest
Password admin or 23646 manager or 6262437 operator or 67372867 guest or 48378
WARNING: Do not shut down the DVR5100 by turning off the power. Doing so can cause data loss or may corrupt the database. Always
follow the procedures in this section to turn off the unit.