Pelco DVR5100 Security Camera User Manual


 
C1695M-B (11/08) 65
AUDIO
Audio Decoding G.711 speech codec
Audio Bit Rate 64 kbps
Audio Levels
Input Line-level input
Output Line-level output
Audio Connectors 3.5 mm monaural jacks
Audio Inputs 2 for 4- and 8-channel models;
4 for 16-channel models
Audio Outputs 1
PTZ CONTROL
PTZ Interface Front panel, USB keyboard/mouse, KBD5000, or through the remote client
PTZ Protocols Pelco D, Pelco P, and Coaxitron
ALARMS/RELAYS
Alarm Inputs 1 per camera, programmable, 5.0 VDC,
10 kohms, triggered, supervised/unsupervised
Relay Outputs
4 or 8 channels 2 relays, N.O./N.C., form-C relay, 30 VDC, 1 A
16 channels 4 relays, N.O./N.C., form-C relay, 30 VDC, 1 A
NETWORK
Interface Ethernet RJ-45 port (1000Base-T to 10/100/1000 Mbps)
AUXILIARY INTERFACES
USB 2.0 1 high-speed USB 2.0 ports on the front panel
2 high-speed USB 2.0 ports on the rear panel
RS-422 1 RS-422 port, programmable up to 19200 baud
FRONT PANEL INDICATORS/FUNCTIONS
Indicators
Power Blue
Hard Disk Drive Activity Yellow
Network Activity Green
Network Status Green, amber, red
Unit Status Green, amber, red
Buttons Configuration/reset, power
POWER
Power Input 100-240 VAC, 50/60 Hz, autoranging
Power Supply Internal
Power Consumption 136 W, 465 BTU/H (maximum)
Cable Type
USA standard 117 VAC, 3 prongs, 6 ft or 1.8 m
European standard 220 VAC, 3 prongs, molded connector, 6 ft or 1.8 m
UK standard 250 VAC, 3 prongs, molded connector, 6 ft or 1.8 m