Filter
Top Products
C1695M-B (11/08) 41
SERIAL PORT SETUP
The RS-422 serial port is the basic connector for communication between the DVR5100 and a PTZ camera when using a serial telemetry control
protocol. The speed of the serial port must match the speed programmed into the camera. Refer to the appropriate camera manual for serial port
speed details. Refer to Table S on page 70 for more information on serial port settings and defaults.
Figure 39. Serial Port Screen
To modify the serial port settings:
• Select the speed from the bps list. Available speeds range from 110–230400.
• Select the parity from the Parity list (None, Odd, or Even).
• Select the number of data bits from the “Data bits” list. Available data bits range from 5–8.
• Select the stop bit number from the “Stop bits” list (1 or 2).