Filter
Top Products
42 C1695M-B (11/08)
DISPLAY SETUP
The Display screen shown in Figure 40 allows you to configure the primary monitor. Refer to Table T on page 71 for more information on display
settings and defaults.
Figure 40. Display Screen
To select the primary monitor format:
1. Under Output, select the Format list to choose the primary monitor format. The default monitor format is VGA. If you use a composite
monitor and start in composite monitor mode, the appropriate format is indicated. If you select a different monitor format, you will be
required to log off from the system, and then log back on to the system.
2. Click the “Overscan adjust” box, and then select the percentage that applies to your monitor.
To select the camera on-screen display (display the camera name, recording status, and date and time in the video pane):
1. Select the desired check box or check boxes.
2. Select the display location from the “Camera name,” “Recording status,” and “Date & time” lists.