Open as PDF
Underwater Housing Instructions >>
7. For great underwater pictures you need:
Clear water conditions, control your buoyancy before taking pictures,
get as close as possible to subject (ideal distance is 2ft to 6ft/ 0.6m to
Use SeaLife Digital Pro Flash (SL961 - optional accessory) to enhance
colors and reduce backscatter.
8. Store housing at room temperature in a clean and dry place.
Do not expose housing to direct sunlight for prolonged periods of time.
Do not store housing in extreme high temperatures, such as the trunk
of your car.
Open view of waterproof housing
The housing door uses one O-ring to form a waterproof seal.
IMPORTANT: Do NOT lubricate O-ring
Insert Moisture Muncher
capsule here (SL911)
O-ring contact surface O-ring (item # SL72017)
Important: Carefully clean and inspect O-ring and O-ring contact
surfaces before each underwater use in accordance with
instructions provided in this manual.
If O-ring needs to be replaced, contact your local
authorized SeaLife dealer for spare parts, or visit
www.sealifepartsdirect.com to order parts (USA only)