Sealife SL736 Digital Camera User Manual


 
Troubleshooting Guide >>
79
TROUBLESHOOTING GUIDE
Refer to the symptoms and solutions listed below before sending the camera
for repairs. Any updates may be found on the SeaLife website at www.sealife-
cameras.com. Look for “Techncial Updates” section. If the problem persists,
contact your local SeaLife dealer for service.
Symptom Cause
Solutions / Corrective
Actions
The power does not
come on.
The battery is not
inserted correctly.
Insert the battery
correctly.
The battery is exhausted. Recharge the battery.
The battery runs out
quickly.
The battery is not fully
charged. The battery is
not used for an extended
period of time after being
charged.
Fully charge the battery
and discharge it for at
least one complete cycle
before use to maximize its
performance and lifetime.
The battery or camera
feels warm
Long period of
continuous use of the
camera of the flash.
Even if I press the
shutter button, the
camera does not take
a picture.
The shutter button is
not pressed all the way
down.
Press the shutter button
all the way down.
The memory card
does not have any free
capacity.
Insert a new memory card,
or delete unwanted files.
The flash is charging. Wait until the status LED
is green.
The memory card is
write-protected.
Remove the
write-protection.
Images do not appear
on the LCD monitor.
LCD monitor is dark. Adjust the brightness of
the LCD monitor in the
menu.