Open as PDF
How To Install And Remove O-Ring >>
HOW TO INSTALL AND REMOVE
To Install O-ring:
Important: The O-ring and O-ring groove must be completely clean before
Step 1: Lay the O-ring over the O-ring groove making sure the O-ring is not
twisted. Orient the O-ring with the more rounded corners on the hinge side
of the housing.
Step 2: Push the O-ring down into the groove. The O-ring should be evenly
seated in the groove..
Step 3: Carefully close housing to ﬁrmly seat O-ring and open housing again to
inspect that O-ring is completely seated into groove. Do NOT grease the O-ring.