TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
123
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
ENUM Dialing
Conguring ENUM Zones
In order for locally registered endpoints to use
ENUM dialing, you must congure an ENUM
zone for each ENUM service used by remote
endpoints. To do this:
VCS Conguration > Zones
•
.
You will be taken to the Zones page.
Click
•
New.
You will be taken to the Create Zone page.
Enter the zone
•
Name and select a Type of
ENUM.
Click
•
Create Zone.
You will be taken to the Edit Zone page.
xCommand ZoneAd
•
d
xConguration Zones Zone [1..200
•
]
ENUM Dialing for Outgoing Calls
Any number of ENUM zones may be
congured on the VCS.
You should congure at least one ENUM
zone for each DNS sufx that your endpoints
may use.
Normal zone pattern matching and
prioritization rules will apply to ENUM
zones.
Name
Assigns a name to this zone.
Type
For ENUM zones, this will be ENUM.
Hop count
Species the hop count to be used when
sending an alias search request to this zone. If
the search request was received from another
zone and already has a hop count assigned,
the lower of the two values will be used.
DNS sufx
The DNS zone that is to be queried for a
NAPTR record. This sufx is appended to the
transformed E.164 number in an attempt to
nd a matching NAPTR record.
H.323 mode
Determines whether or not H.323 records will
be looked up for this zone.
SIP mode
Determines whether or not SIP records will be
looked up for this zone.
Match1 - Match5
These sections allow you to specify any ltering
criteria and/or transforms you wish to apply to
this zone. See Conguring Matches for ENUM
zones and Conguring Transforms for ENUM
zones for full information on how the Match
options can be applied.
 previous next