TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
83
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Zones
Once you have created a new zone on the local
VCS you must congure it appropriately. For
traversal server zones, traversal client zones
and neighbor zones this will include providing
information about the neighbor system such as
IP address and ports.
Zones are congured via the Edit Zone page.
You will be taken to this page automatically
upon creation of a new zone. To access this
page for an existing zone:
VCS Conguration > Zones
•
.
You will be taken to the Zones page.
Click on the name of the zone you wish to
congure.
You will be taken to the Edit Zone page.
xConguration Zones Zone [1..200
•
]
The sections that follow describe the
conguration options available for each zone
type.
Adding Zones
Name
Enter the name you wish to give to this zone.
The name acts as a unique identier, allowing
you to distinguish between zones of the same
type.
Type
From the Type drop-down menu, select the type
of zone you wish to add.
Once the zone has been created, the Type
cannot be changed.
Create Zone
Click here to create the zone. You will be taken
directly to the Edit Zone page.
In order to neighbor with another system (e.g.
VCS, gatekeeper or Border Controller) or create
an ENUM or DNS zone, you must add a new
zone on the local VCS. When adding a new
zone you will be asked to specify its Type; this
will determine which conguration options will
then be available.
To create a new zone:
VCS Conguration > Zones.
•
You will be taken to the Zones page.
Click New.
You will be taken to the Create Zone page.
xCommand ZoneAd
•
d
Conguring Zones
Cancel
Click here to return to the Zones page without
creating the zone.
 previous next