TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
85
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Zones
Alternate 1 to Alternate 5 address
Enter the IP addresses or FQDNs of all Alternates congured on
the neighbor system.
Primary address
Enter the IP address or FQDN of the neighbor system.
SIP port
Species the port on the neighbor system to
be used for SIP calls from the local VCS.
H.323 port
Species the port on the neighbor system to
be used for H.323 calls from the local VCS.
SIP transport
Determines which transport type will be used for SIP calls to and
from the neighbor zone.
Conguring Neighbor Zones
SIP mode
Determines whether SIP calls will be allowed to
and from the neighbor zone.
H.323 mode
Determines whether H.323 calls will be allowed
to and from the neighbor zone.
This must be the same port number as
that congured on the neighbor system
as its SIP TCP or SIP TLS port
(depending on which SIP transport mode is in
use).
This must be the same port number as
that congured on the neighbor system
as its H.323 UDP port. If the neighbor
is another VCS, this will be the port found
under VCS Conguration > Protocols > H.323
in the Registration UDP Port eld.
SIP transport
Determines which transport type will be used
for SIP calls to and from the neighbor zone.
 previous next