TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
217
D14049.03
MAY 2008
Grey Headline (continued)
CheckPattern
A diagnostic tool that allows you to check the result of an alias transform (local or zone) before you congure it on the system. Note that this command does not change any existing system
conguration.
Target(r): <S: 1, 60>
The original alias.
Pattern(r): <S: 1, 60>
The pattern against which the alias is to be compared.
Type(r): <Exact/Prex/Sufx/Regex>
The way in which the pattern must match the alias in order for the transform to be applied.
Behavior(r): <Strip/Replace>
The way in which the alias will be modied.
Replace: <S: 1, 60>
(Applies only if Behavior is set to Replace.) The string to be substituted for the part of the alias that matched the pattern.
Example: xCommand CheckPattern Target: "john.smith@example.net" Pattern: "@example.net" Type: "sufx" Behavior: replace Replace: "@example.com"
CredentialAdd
Adds an entry to the local authentication database.
CredentialName(r): <S: 1, 128>
Denes the name for this entry in the local authentication database.
CredentialPassword(r): <S: 1, 128>
Denes the password for this entry in the local authentication database.
Example: xCommand CredentialAdd CredentialName: "John Smith" CredentialPassword: "password123"
CredentialDelete
Deletes an entry from the local authentication database.
CredentialId(r): <1..2500>
The index of the credential to be deleted.
Example: xCommand CredentialDelete CredentialId: 2
DefaultLinksAdd
Restores links between the Default Subzone, Traversal Subzone and the Default Zone.
This command has no parameters.
Example: xCommand DefaultLinksAdd
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xCommand
 previous next