TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
204
D14049.03
MAY 2008
Grey Headline (continued)
Transform [1..100] Priority: <1..65534>
Assigns a priority to the specied transform. Transforms are applied in order of priority, and the priority must be unique for each transform.
Example: xConguration Transform 1 Priority: 10
Traversal Media Port End: <1024..65534>
For traversal calls (i.e. where the VCS is taking the media as well as the signaling), species the upper port in the range to be used for the media. Ports are allocated from this range in pairs,
the rst of each being even. Therefore the range must end with an odd number.
Default: 51199
Example: xConguration Traversal Media Port End: 51199
Traversal Media Port Start: <1024..65534>
For traversal calls (i.e. where the VCS is taking the media as well as the signaling), species the lower port in the range to be used for the media. Ports are allocated from this range in pairs,
the rst of each being even. Therefore the range must start with an even number.
Default: 50000
Example: xConguration Traversal Media Port Start: 50000
Traversal Server H323 Assent CallSignaling Port: <1024..65534>
Species the port on the VCS to be used for Assent signaling.
Default: 2776
Example: xConguration Traversal Server H323 Assent CallSignaling Port: 2777
Traversal Server H323 H46018 CallSignaling Port: <1024..65534>
Species the port on the VCS to be used for H460.18 signaling.
Default: 2777
Example: Traversal Server H323 H46018 CallSignaling Port: 2777
Traversal Server Media Demultiplexing RTCP Port: <1024..65534>
Species the port on the VCS to be used for demultiplexing RTCP media. Note: You must restart the system for any changes to take effect.
Default: 2777
Example: xConguration Traversal Server Media Demultiplexing RTCP Port: 2777
Traversal Server Media Demultiplexing RTP Port: <1024..65534>
Species the port on the VCS to be used for demultiplexing RTP media. Note: You must restart the system for any changes to take effect.
Default: 2776
Example: xConguration Traversal Server Media Demultiplexing RTP Port: 2776
Traversal Server STUN Discovery Mode: <On/Off>
Determines whether the VCS will offer STUN discovery services to traversal clients.
Default: On
Example: xConguration Traversal Server STUN Discovery Mode: On
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConguration
 previous next