TANDBERG Security Camera Security Camera User Manual


 
30
D14049.03
MAY 2008
Grey Headline (continued)
Understanding the Registrations Page
The Registrations page lists all the devices
that are currently registered with the VCS.
Devices that are congured for both SIP and
H.323 will register twice; once as an H.323
endpoint and once as a SIP UA.
To view the Registrations page:
Status > Registrations
Viewing the Registrations Page
Name
The H.323 alias or SIP AOR that the device
registered.
Clicking on an individual name will take you
to the Registrations Details page for that
registration.
Type
Indicates the nature of the registration. This
will most commonly be Endpoint, Gateway, or
SIP UA.
Protocol
Whether the registration is for a SIP or H.323
device.
Creation Time
The date and time at which the registration
was accepted.
If an NTP server has not been
congured, this will say Time not set.
IP Address
For H.323 devices, this is the RAS address.
For SIP UAs it is the Contact address
presented in the REGISTER request.
Unregister
Click here to remove the selected registrations.
Note that removing a registration will not
prevent the same device from automatically
re-registering.
Filter
To limit the list of registrations, enter one or
more characters in the Filter eld and select
Filter. Only those registrations that contain
(in any of the displayed elds) the string you
entered will be shown.
To return to the full list of registrations, click
Reset.
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Registrations