TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
199
D14049.03
MAY 2008
Grey Headline (continued)
LDAP UserDN: <S: 0, 255>
Sets the user distinguished name to be used when binding to the LDAP server.
Example: xConguration LDAP UserDN: "User123"
Log Level: <1..3>
Controls the granularity of event logging. 1 is the least verbose, 3 the most.
Note: this setting is not retrospective; it will determine which events are written to the event log from now onwards.
Default: 1
Example: xConguration Log Level: 1
Log Server Address: <S: 0, 128>
Species the IP Address or Fully Qualied Domain Name (FQDN) of the remote syslog server to which the log will be written. This server must support the BSD syslog protocol. It cannot be
another VCS.
Example: xConguration Log Server Address: "syslog.server.example.com"
NTP Address: <S: 0, 128>
Sets the IP Address or Fully Qualied Domain Name (FQDN) of the NTP server to be used when synchronizing system time.
Example: xConguration NTP Address: "ntp.server.example.com"
Option [1..64] Key: <S: 0, 90>
Species the option key of your software option. These are added to the VCS in order to add extra functionality, such as increasing the VCS’s capacity. Contact your TANDBERG
representative for further information.
Example: xConguration Option 1 Key: "1X4757T5-1-60BAD5CD"
Policy AdministratorPolicy Mode: <On/Off>
Enables and disables use of Administrator Policy.
Default: Off
Example: xConguration Policy AdministratorPolicy Mode: Off
Policy UserPolicy Mode: <Off/Local/Remote>
Determines the User Policy Manager usage and location.
Off: User Policy Manager is not used.
Local: the on-box User Policy Manager is used.
Remote: the off-box User Policy Manager is used.
Default: Local
Example: xConguration Policy UserPolicy Mode: Local
Policy UserPolicy Server Address: <S: 0, 128>
Species the IP Address or Fully Qualied Domain Name (FQDN) of the remote User Policy Manager.
Example: xConguration Policy UserPolicy Server Address: "userpolicy.server.example.com"
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConguration
 previous next