TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
75
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Registration Control
About Allow and Deny Lists
When an endpoint attempts to register with
the VCS it presents a list of aliases. You can
control which endpoints are allowed to register
by setting the Restriction Policy to AllowList
or DenyList and then including any one of the
endpoint’s aliases on the Allow List or the Deny
list as appropriate. Each list can contain up
to 2,500 entries. When an endpoint attempts
to register, each of its aliases is compared
with the patterns in the relevant list to see if
it matches. Only one of the aliases needs to
appear in the Allow List or the Deny List for the
registration to be allowed or denied.
For example, If the Registration Restriction
policy is set to DenyList and an endpoint
attempts to register using three aliases, one of
which matches a pattern on the Deny list, that
endpoint’s registration will be denied. Likewise,
if the Registration Restriction policy is set to
AllowList, only one of the endpoint’s aliases
needs to match a pattern on the Allow list for it
to be allowed to register using all its aliases.
Patterns and Pattern Types
Entries on the Allow List and Deny List are a
combination of Pattern and Type. The Pattern
species the string to be matched; the Type
determines whether that string;
must match the Pattern exactly (
•
Exact)
must appear at the start of the alias (
•
Prex)
must appear at the end of the alias (
•
Sufx)
is in the form of a Regular Expression
•
(Regex).
Allow and Deny Lists
Restriction policy
Species the policy to be used when determining which endpoints may register with the VCS.
None: Any endpoint may register.
AllowList: Only those endpoints with an alias that matches an entry in the Allow List may register.
DenyList: All endpoints may register, unless they match an entry on the Deny List.
The default is None.
Activating use of Allow or Deny Lists
To activate the use of Allow or Deny lists to determine which aliases are allowed to register with the VCS:
VCS Conguration > Registration > Conguration
•
.
You will be taken to the Registration Conguration page.
xConguration Registration RestrictionPolic
•
y
Allow Lists and Deny Lists are mutually
exclusive: only one may be in use at any
given time.
Save
Click here to save your changes.
 previous next