TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
218
D14049.03
MAY 2008
Grey Headline (continued)
DefaultValuesSet
Resets system parameters to default values.
Level(r): <1..3>
The level of system parameters to be reset.
Level 1: will reset most parameters.
Level 2: There are currently no level 2 parameters, so setting that level has the same effect as setting level 1.
Level 3 resets all level 1 and 2 parameters as well as additional parameters. See the section Restoring Default Conguration for full details.
Example: xCommand DefaultValuesSet Level: 1
DenyListAdd
Adds an entry to the Deny List.
PatternString(r): <S: 1, 60>
Species an entry to be added to the Deny List. If one of an endpoint's aliases matches one of the patterns in the Deny List, the registration will not be permitted.
PatternType: <Exact/Prex/Sufx/Regex>
Species whether the entry in the Deny List is a prex, sufx, regular expression, or must be matched exactly.
Example: xCommand DenyListAdd PatternString: "sally.jones@example.com" PatternType: "exact"
DenyListDelete
Deletes an entry from the Deny List.
DenyListId(r): <1..2500>
The index of the entry to be deleted.
Example: xCommand DenyListDelete DenyListId: 2
DisconnectCall
Disconnects a call.
Call: <1..900>
The index of the call to be disconnected.
CallSerialNumber: <S: 0, 255>
The serial number of the call to be disconnected.
Note: you must specify either a call index or call serial number when using this command.
Example: xCommand DisconnectCall CallSerialNumber: "6d843434-211c-11b2-b35d-0010f30f521c"
DomainAdd
Adds a SIP domain for which this VCS is authoritative.
DomainName(r): <S: 1, 128>
Species the name of the domain.
Example: xCommand DomainAdd DomainName: "example.com"
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xCommand
 previous next