Filter
Top Products
166
D14049.03
MAY 2008
Grey Headline (continued)
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Passwords
Conguring Administrator Password
In order to access the VCS administrator
interface, you must log in using a valid
username and password.
The same username and password are used
whether you are accessing the VCS via the web
interface or the command line interface.
The username is always admin (all lower case);
this can not be changed.
The default password is TANDBERG (all upper
case). You should change this as soon as
possible. We recommend that you choose a
strong password, particularly if administration
over IP is enabled. The maximum password
length is 16 characters.
Both the username and password are case-
sensitive.
New password
Enter your new password here.
Delete password
Click here to reset the Administrator Password
to a blank eld.
Retype new password
Retype your new password here.
Overview
To change the password used to log in to the
VCS:
Maintenance > Passwords
•
.
You will be taken to the Passwords page.
xConguration SystemUnitPasswor
•
d
Restart
You must restart the system for changes to
take effect.
If you forget the Administrator
password, it is possible to reset it if you
have physical access to the VCS. See
the section Resetting the Administrator
Password for details.
This page describes how to reset the
Administrator password. For
instructions on how to reset passwords
for FindMe users, see the section Changing a
User Password.