TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
206
D14049.03
MAY 2008
Grey Headline (continued)
Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode: <Limited/Unlimited/NoBandwidth>
Determines whether there is a limit on the bandwidth for any one call between two endpoints within the Default Subzone.
NoBandwidth: no bandwidth available. No calls can be made within the Default Subzone.
Default: Unlimited
Example: xConguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode: Limited
Zones LocalZone DefaultSubZone Bandwidth Total Limit: <1..100000000>
Sets the total bandwidth limit (in kbps) of the Default Subzone (applies only if Mode is set to Limited).
Default: 500000
Example: xConguration Zones LocalZone DefaultSubZone Bandwidth Total Limit: 500000
Zones LocalZone DefaultSubZone Bandwidth Total Mode: <Limited/Unlimited/NoBandwidth>
Determines whether the Default Subzone has a limit on the total bandwidth being used by its endpoints at any one time.
NoBandwidth: no bandwidth available. No calls can be made to, from, or within the Default Subzone.
Default: Unlimited
Example: xConguration Zones LocalZone DefaultSubZone Bandwidth Total Mode: Limited
Zones LocalZone SubZone [1..100] Bandwidth PerCall Inter Limit: <1..100000000>
Species the bandwidth limit (in kbps) on any one call to or from an endpoint in this subzone (applies only if Mode is set to Limited).
Default: 1920
Example: xConguration Zones LocalZone SubZone 1 Bandwidth PerCall Inter Limit: 1920
Zones LocalZone SubZone [1..100] Bandwidth PerCall Inter Mode: <Limited/Unlimited/NoBandwidth>
Determines whether there is a limit on the bandwidth for any one call to or from an endpoint in this subzone.
NoBandwidth: no bandwidth available. No calls can be made to or from this subzone.
Default: Unlimited
Example: xConguration Zones LocalZone SubZone 1 Bandwidth PerCall Inter Mode: Limited
Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Limit: <1..100000000>
Species the bandwidth limit (in kbps) for any one call between two endpoints within this subzone (applies only if Mode is set to Limited).
Default: 1920
Example: Zones LocalZone SubZone 1 Bandwidth PerCall Intra Limit: 1920
Zones LocalZone SubZone [1..100] Bandwidth PerCall Intra Mode: <Limited/Unlimited/NoBandwidth>
Determines whether there is a limit on the bandwidth for any one call between two endpoints within this subzone.
NoBandwidth: no bandwidth available. No calls can be made within this subzone.
Default: Unlimited
Example: xConguration Zones LocalZone SubZone 1 Bandwidth PerCall Intra Mode: Limited
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConguration
 previous next