TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
196
D14049.03
MAY 2008
Grey Headline (continued)
H323 Gatekeeper CallSignaling PortRange End: <1024..65534>
Species the upper port in the range to be used by calls once they are established.
Default: 19999
Example: xConguration H323 Gatekeeper CallSignaling PortRange End: 19999
H323 Gatekeeper CallSignaling PortRange Start: <1024..65534>
Species the lower port in the range to be used by calls once they are established.
Default: 15000
Example: xConguration H323 Gatekeeper CallSignaling PortRange Start: 15000
H323 Gatekeeper CallSignaling TCP Port: <1024..65534>
Species the port that listens for H.323 call signaling.
Default: 1720
Example: xConguration H323 Gatekeeper CallSignaling TCP Port: 1720
H323 Gatekeeper CallTimeToLive: <60..65534>
Species the interval (in seconds) at which the VCS polls the endpoints in a call to verify that they are still in the call.
Default: 120
Example: xConguration H323 Gatekeeper CallTimeToLive: 120
H323 Gatekeeper Registration ConictMode: <Reject/Overwrite>
Determines how the system will behave if an endpoint attempts to register an alias currently registered from another IP Address.
Reject: denies the registration.
Overwrite: deletes the original registration and replaces it with the new registration.
Default: Reject
Example: xConguration H323 Gatekeeper Registration ConictMode: Reject
H323 Gatekeeper Registration UDP Port: <1024..65534>
Species the port to be used for H.323 UDP registrations.
Default: 1719
Example: xConguration H323 Gatekeeper Registration UDP Port: 1719
H323 Gatekeeper TimeToLive: <60..65534>
Species the interval (in seconds) at which an H.323 endpoint must re-register with the VCS in order to conrm that it is still functioning.
Default: 1800
Example: xConguration H323 Gatekeeper TimeToLive: 1800
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConguration
 previous next