TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
216
D14049.03
MAY 2008
Grey Headline (continued)
AllowListAdd
Adds an entry to the Allow List.
PatternString(r): <S: 1, 60>
Species an entry to be added to the Allow List. If one of an endpoint's aliases matches one of the patterns in the Allow List, the registration will be permitted.
PatternType: <Exact/Prex/Sufx/Regex>
Species whether the entry in the Allow List is a prex, sufx, regular expression, or must be matched exactly.
Example: xCommand AllowListAdd PatternString: "John.Smith@example.com" PatternType: Exact
AllowListDelete
Deletes an entry from the Allow List.
AllowListId(r): <1..2500>
The index of the entry to be deleted.
Example: xCommand AllowListDelete AllowListId: 2
Boot
Restarts the VCS.
This command has no parameters.
Example: xCommand boot
CheckBandwidth
A diagnostic tool that returns the status and route (as a list of nodes and links) that a call of the specied type and bandwidth would take between two nodes. Note that this command does
not change any existing system conguration.
Node1(r): <S: 1, 50>
The subzone or zone from which the call originates.
Node2(r): <S: 1, 50>
The subzone or zone at which the call terminates.
Bandwidth(r): <1..100000000>
The requested bandwidth of the call (in kbps).
CallType(r): <Traversal/NonTraversal>
Whether the call type is Traversal or Non Traversal.
Example: xCommand CheckBandwidth Node1: "DefaultSubzone" Node2: "UK Sales Ofce" Bandwidth: 512 CallType: nontraversal
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xCommand
 previous next