Filter
Top Products
54
D14049.03
MAY 2008
Grey Headline (continued)
About SNMP
Tools such as TANDBERG Management Suite
(TMS) or HP OpenView may act as SNMP
Network Management Systems (NMS). They
allow you to monitor your network devices,
including the VCS, for conditions that might
require administrative attention.
The VCS offers basic support for SNMP, and
supports Version 1 and Version 2c of the
SNMP protocol. The information provided by
the VCS is dened by SNMP MIB-2 and is:
system uptime
•
system name
•
location
•
contact.
•
To allow the VCS to be monitored by an SNMP
NMS, you must enable SNMP on the VCS and
provide the name of the SNMP community
within which it resides. You may optionally
provide the name of a System contact and the
physical Location of the system for reference
by administrators when following up on queries.
By default, SNMP is Enabled with a SNMP
community name of public.
Note: the VCS does not support SNMP traps
or SNMP sets, therefore it cannot be managed
via SNMP.
To congure the VCS’s SNMP settings:
System Conguration > SNMP
•
You will be taken to the SNMP page.
xConguration SNM
•
P
Location
Species the physical location of the VCS.
Enabled
Select On to enable SNMP support.
SNMP community name
Sets the VCS’s SNMP community name.
System contact
Species the name of the person who can be
contacted regarding issues with the VCS.
Save
Click here to save your changes.
Restart
Click here to restart the system.
You must save your changes and
restart the system for any changes to
take effect.
Conguration
Overview
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
SNMP