TANDBERG Security Camera Security Camera User Manual


  Open as PDF
of 247
 
212
D14049.03
MAY 2008
Grey Headline (continued)
Zones Zone [1..200] TraversalClient H323 Port: <1024..65534>
Species the port on the traversal server to be used for H.323 rewall traversal calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been
congured in the Traversal Server zone for this VCS.
Default: 2777
Example: xConguration Zones Zone 2 TraversalClient H323 Port: 2777
Zones Zone [1..200] TraversalClient H323 Protocol: <Assent/H46018>
Determines which of the two rewall traversal protocols will be used for calls to and from the traversal server.
Note: the same protocol must be set on the server for calls to and from this traversal client.
Default: Assent
Example: xConguration Zones Zone 2 TraversalClient H323 Protocol: Assent
Zones Zone [1..200] TraversalClient Primary Address: <S: 0, 128>
Species the IP Address or Fully Qualied Domain Name (FQDN) of the traversal server.
Example: xConguration Zones Zone 2 TraversalClient Primary Address: "10.192.168.1"
Zones Zone [1..200] TraversalClient RetryInterval: <1..65534>
Species the interval (in seconds) with which a failed attempt to establish a connection to the traversal server should be retried.
Default: 120
Example: xConguration Zones Zone 2 TraversalClient RetryInterval: 120
Zones Zone [1..200] TraversalClient SIP Port: <1024..65534>
Species the port on the traversal server to be used for SIP calls from this VCS. If your traversal server is a VCS Expressway, this must be the port number that has been congured in the
Traversal Server zone for this VCS.
Default: 5060
Example: xConguration Zones Zone 2 TraversalClient SIP Port: 5060
Zones Zone [1..200] TraversalClient SIP Transport: <TCP/TLS>
Determines which transport type will be used for SIP calls to and from the traversal server.
Default: TCP
Example: xConguration Zones Zone 2 TraversalClient SIP Transport: TCP
Zones Zone [1..200] TraversalServer Authentication UserName: <S: 1, 128>
The name used by the traversal client when authenticating with the traversal server. If the traversal client is a VCS, this must be the VCS’s Authentication User Name. If the traversal client is
a gatekeeper, this must be the gatekeeper’s System Name.
Example: xConguration Zones Zone 3 TraversalServer Authentication UserName: "User123"
TANDBERG VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
Headline Text Goes Here
Introduction Getting Started
Overview and
Status
System
Conguration
VCS
Conguration
Zones and
Neighbors
Call
Processing
Bandwidth
Control
Firewall
Traversal
Maintenance Appendices
Command Reference - xConguration
 previous next