Filter
Top Products
VG4 Modular Camera System Keyboard Commands by Number | en 43
Bosch Security Systems, Inc. User’s Manual F.01U.133.268 | 6.0 | 2010.03
6 Keyboard Commands by Number
Locked Function
Key
Comm
No.
Command Description Series
200
Series
300
Series
500i
On/Off 1 Scan 360° Autopan without limits * * *
On/Off 2 Autopan Autopan between limits * * *
* On/Off 3 Iris Control Enters menu (auto, manual) * * *
* On/Off 4 Focus Control Enters menu (spot, auto,
manual)
** *
On/Off 7 Play Custom Pre-position
Tour
Activate/Deactivate * *
On/Off 8 Play Pre-position Tour Activate/Deactivate * * *
* On/Off 9 Inactivity Mode Enters menu (Off, Return to
Scene 1, Recall Previous PTZ
Command)
** *
* On/Off 11 Auto Iris Level adjust Enters Iris Level Adjustment
menu
** *
On/Off 14 Set Autopan and Scan
Speed
Enters speed adjustment slide
bar
** *
On/Off 15 Set Pre-position Tour
Period (dwell)
Enters dwell adjustment slide
bar
** *
* On/Off 18 AutoPivot Enable Enables/disables AutoPivot * * *
On/Off 20 Backlight Comp Backlight Compensation * * *
* On/Off 23 Electronic Shutter Enters Shutter Speed slide bar * * *
On/Off 24 Stabilization Electronic Stabilization *
On/Off 26 Wide Dynamic Range
(WDR camera only)
Activate/Deactivate * *
* On/Off 35 White Balance Mode Enters White Balance menu * * *
* On 40 Restore Camera Settings Restores all setting to their
original defaults
** *
* On/Off 41 Line Lock Phase Adjust Enters delay adjustment slide
bar
** *
* On/Off 42 Sync Mode On–Line Lock
Off–Internal
** *
* On/Off 43 Auto Gain Control AGC–On, Auto, Off * * *
* On/Off 44 Sharpness Enters Sharpness menu * * *
* On 46 Advanced menu Enters Main Setup menu * * *
On 47 View Factory Settings View all menu default settings * * *
On/Off 50 Playback A, continuous Activate/Deactivate * *
On/Off 51 Playback A, single Activate/Deactivate * *
On/Off 52 Playback B, continuous Activate/Deactivate * *
On/Off 53 Playback B, single Activate/Deactivate * *
On/Off 56 Night Mode menu On, Off, Auto (Day/Night only) * * *
On/Off 57 Night Mode setting Enables/disables Night Mode
(Day/Night only)
** *