Filter
Top Products
VG4 Modular Camera System Using the IP AutoDome | en 63
Bosch Security Systems, Inc. User’s Manual F.01U.133.268 | 6.0 | 2010.03
Triggering Relay
You can switch connected units using the relays in the IP AutoDome (for example lights or
door openers).
To activate this, click the icon for the corresponding relay next to the video image. The
icon will be red when the relay is activated.
System Log / Event Log
The System Log field contains information about the operating status of the IP AutoDome and
the connection. You can save these messages automatically in a file (see the IP AutoDome
online help).
Events such as the triggering or end of alarms are shown in the Event Log field. You can save
these messages automatically in a file.
1. If you want to delete the entries, click the delete icon in the top right-hand corner of the
relevant field.
2. If you want to view a detailed log, click the icon in the top right-hand corner of the
relevant field. A new window will open.
Audio Function
Depending on the configuration, the IP AutoDome can send and receive audio signals. All
users who are connected by browsers receive the audio signals sent by the IP AutoDome.
Audio signals can only be sent to the IP AutoDome by the user who connects to the unit first.
1. On the LIVEPAGE, click anywhere next to the video image to remove the focus from the
ActiveX.
2. Hold down the F12 key to make a voice connection to the IP AutoDome. The browser's
status bar displays the message Send Audio ON.
3. Release the F12 key when you want to stop sending audio signals to the IP AutoDome.
The status bar in Internet Explorer displays the message Send Audio OFF.
8.6.1 Entering a Keyboard Control Command
The Aux Control tab is used to enter keyboard control commands. These commands are
composed of a command number plus the appropriate function key (Show Shot, Set Shot Aux
On or Aux Off). A valid combination either issues a command to the camera or displays an on-
screen menu.
NOTICE!
When the connection maintaining voice contact with the IP AutoDome is broken, the next user
to make a connection to the IP AutoDome can send audio data to the IP AutoDome.