Filter
Top Products
VG4 Modular Camera System Using the IP AutoDome | en 55
Bosch Security Systems, Inc. User’s Manual F.01U.133.268 | 6.0 | 2010.03
8 Using the IP AutoDome
The VG4-200, VG4-300, and VG4-500i Series AutoDomes can be ordered with an optional IP
module that allows the AutoDome to transmit PTZ control commands and images over a TCP/
IP network. It also allows users to configure the AutoDome camera display settings, camera
operating settings, and to configure the network parameters.
The IP AutoDome incorporates a network video server in the IP module. The primary function
of the server is to encode video and control data for transmission over a TCP/IP network. With
its MPEG-4 encoding, it is ideally suited for IP communication and for remote access to digital
video recorders and multiplexers. The use of existing networks means that integration with
CCTV systems or local networks can be achieved quickly and easily. Video images from a
single camera can be simultaneously received on several receivers.
8.1 Overview of Features
The IP module adds the following functionality to an AutoDome system:
Function Description
Video Encoding The camera uses the H.264 compression standard and ensures that the
data rate remains low even with high image quality and can also be
adapted to local conditions within wide limits.
Dual Streaming Encodes dual data streams simultaneously according to two individually
customized profiles. This feature creates two (2) data streams per
camera that can serve different purposes. For example, one (1) data
stream for local recording and one (1) data stream optimized for
transmission over the Local Area Network (LAN).
Multicast Enables simultaneous, real-time transmission to multiple receivers. The
network must implement the UDP and IGMP V2 protocols as a
prerequisite for Multicasting.
Configuration Allows configuration for all camera settings from a Web browser on the
local network (Intranet) or on the Internet. You can also update the
firmware, load device configurations, store configuration settings, and
copy these settings from one camera to another.
Snapshots Allows you to take and store individual video frames as JPEG images
from the Web browser interface.
Backup Saves video images as a file on a computer’s hard drive from the Web
browser interface.
Audio Switches between Biphase-in to Audio-in (line 2V P-P) microphone.
Record Allows configuration for the recording options of the IP module. You can
record video from the Livepage to a hard drive or you can opt to store up
to 8 MB of video on the IP module.