Support User Manuals

Enterasys Networks X009-U Camera Accessories User Manual

Open as PDF

of 86

Features

1-4 Overview

supportsAccessControlLists(ACLs)and,bydefault,isassociatedwiththeVPNRouting/

Forwarding(VRF)instancethatallinterfacesareassignedto.Beawareofthefollowingcaveats,

however,whenusingthisinterface:

•IGPandEGProutingprotocolsdonotexportroutes

•Bridgingisnotsupported

TheConsoleportisconsideredthe

primaryCLIinterface,andisusefulforreadingstartup and

diagnosticmessages,eventlogging,andmanyothertasks.

TheCMsupportsupto18TelnetorSSHsessionswhichmaybebuiltonanymoduleinterface.

RefertotheMatrixXRouterConfigurationGuideformoreinformation.

Installing Redundant CMs into an Active Matrix X Router

ToensureredundantCMinstallationinanactivesystemisperformedcorrectly,performthe

followingsteps:

1. VerifythattheactiveCMisupbyenteringtheshowsystemhardwarecommand.For

example,iftheactiveCMisinslot1,thefollowingoutput(partial)willdisplay:

matrix-x(switch-su)-> show system hardware cm 1

CM SLOT 1

Model: CM Version 1.0

State: Active

...

2. Backupyourexistingconfigurationwiththeshowconfigoutfilecommand.Forexample,to

copythefileFeb2 5.cfgyoucreatedthatcontainsthecurrentrunningconfigurationonyour

system,typethefollowing:

matrix-x(switch-su)-> show config outfile public/Feb25.cfg

TheconfigurationissavedinthefileFeb25.cfginthepublic/directoryonboththeactiveand

standbyCMs.

3. Optionally,copythefileyoujustcreatedtothelocal/directoryonboththeactiveandstandby

CMs.Thelocal/directoryisanon‐replicatedbackupareathatcanbeusedto

storefilesthat

youwanttokeepduringafirmwareupgradeordowngrade,sinceanupgradeordowngrade

maywipeoutthepublicdirectory.

matrix-x(switch-su)-> copy public/feb25.cfg local/Feb25.cfg

matrix-x(switch-su)-> copy public/feb25.cfg standby:local/feb25.cfg

4. Copythebackupconfigurationfiletoaremotelocationusingthecopycommand.For

example,tocopytheFeb25.cfgfiletoaremotesiteusingFTP,typethefollowing:

matrix-x(switch-su)-> copy public/Feb25.cfg ftp://usergina@10.10.10.10/

scripts/Feb25.cfg

Caution: Do not remove an active CM that is in the process of synchronizing with a standby CM.

This can potentially cause loss of the system's startup configuration.

Precaución: No quite el CM activo que esté en el proceso de sincronizar con un CM redundante.

Esto puede causar una pérdida de la configuración del arranque de sistema.

previous next