Enterasys Networks X009-U Camera Accessories User Manual


 
Setting Up the Matrix X4-C Chassis
Matrix X4-C Chassis Installation Guide 3-7
Installing Optional Mid-Mount Brackets
Youcanpurchaseanoptionalmidmountbracketkit(X4MBRKT)forarackorcabinetwhenthe
standardfrontchassisearattachmentisunusableduetospaceorweightsupportconcerns.To
installthebrackets,proceedasfollows:
1. Keepingtheabovenotesinmind,locatethepositiononthechassis
whereyouwillinstallthe
brackets.Thechassisrequires61.85centimeters(24.35inches)ofverticalspacing.
2. Aligntheholesinonebracketwiththoseinthechassisears,asshowninFigure 35,then
fastenittothechassisusingtwoofthescrewssuppliedwiththebracketkit.Insertthe
third
screwintheholeatthebottomofthe bracketandattachtothechassis.
3. Installthesecondbracketasdescribedearlier,usingthethreeremainingscrews.
Figure 3-5 Fastening Mid-Mount Brackets
Warning: If the rack is not secured to the floor, it is recommended that you install the chassis in the
bottom half of the rack. This helps prevent the rack from being top heavy.
Advertencia: Si el rack no esta asegurado al piso, es recomendable que instales el chasis en la
parte de abajo del rack. Esto ayuda a prevenir que el rack este demasiado pesado en la parte
superior.
Warnhinweis: Falls das Rack nicht mit Schrauben am Boden gesichert wird, sollte das Chassis in
der unteren Hälfte des Racks installiert werden, um ein kippen des Racks zu vermeiden.
Warning: Before rack-mounting the device, ensure that the rack can support it without
compromising stability. Otherwise, personal injury and/or equipment damage may result.
Advertencia: Antes de montar el equipo en el rack, asegurarse que el rack puede soportar su peso
sin comprometer su propia estabilidad, de otra forma, daño personal o del equipo puede ocurrir.
Warnhinweis: Überzeugen Sie sich vor dem Einbau des Gerätes in das Rack von dessen
Stabilität, ansonsten könnten Personenschäden oder Schäden am Gerät die Folge sein.
1 Mid-mount brackets (2) 2 1/4-20 chassis screws (2) 3 #10 ear screws (4)
FM2
FM1
S/N: MAC ADD.
GROUND
STRAP
CM2
CM1
4
3
2
1
FAN
TRAY
Matrix
X4
FAN
TRAY
13
2
3 1
2