Support User Manuals

Enterasys Networks X009-U Camera Accessories User Manual

Open as PDF

of 86

Attaching Cables, Installing Compact Flash Card and DIMM Upgrade Kit

3-34 Matrix X4-C Chassis Setup

Figure 3-31 Removing the Existing DIMM

5. Repeatstep4toremovethesecondDIMM.

Installing the DIMMs

ToinstalltheDIMMsandproceedasfollows:

1. Makesureconnectorarmsarepushedout.

2. InsertthefirstDIMMdownbetweentheconnectorfingers.

3. PushdownontheDIMMandpushinonthe connectorarmsunt ilthearmslockintothetop

notch.

4. Repeatsteps1through3toinstallthe

secondDIMM.

1 DIMM 2 Connector fingers 3 Connector arms

Caution: Observe all Electrostatic Discharge (ESD) precautions when handling sensitive

electronic equipment.

Precaución: Al trabajar con equipos electrónicos sensibles, tome todas las precauciones de

seguridad para evitar descargas de electricidad estática.

previous next