Filter
Top Products
84
Remote Viewing Interface
Setting tab>Record>Schedule).
Configuring Alarm Notifications (16-Channel ECO Blackbox+
Only)
Configure the settings for alarm devices (not included).
To configure alarm noti
fications:
1 Click the Remote Setting t
ab, and click Alarm >Alarm.
2 Configure the following:
• Alarm In: Select
the channel that you wish to configure.
• Alarm Type:
Select the alarm type N/O (normally open), N/C (normally closed), of select OFF.
• Buzzer: Sel
ect the "beep" duration when an event occurs.
• Latch Time: Select the desir
ed latch time when an alarm triggers.
• Show Message: Sel
ect the checkbox so that the system displays a warning message during
an alarm recording.
• Send email: Select the checkbo
x for the system to send out email alerts during an alarm
recording.
• Full Screen:
Select the checkbox to enable the system to go into Full-screen View when an
alarm triggers.
• Alarm out: Sele
ct the checkbox to enable alarm out devices to activate.
• Enable Record: Sel
ect the checkbox to enable system recording when an alarm triggers.
• Post Recording:
Select the desired post recording time after an alarm triggers.
• Record Channel: Sel
ect the channels that the system should record during an alarm trigger.
3 Click Sav
e to apply your settings.