Filter
Top Products
115
Appendix C: Connecting Additional External Monitors
Appendix C: Connecting Additional External Monitors
Use the Video Output ports (BNC) on the rear panel of the system to connect an external
monitor(s). This is useful if you need to monitor the system from a second location (e.g. a
back office).
The mouse and system interface are shown on either the VGA or BNC monitor. Press 0 on
the remote control three t
imes to switch the mouse and system interface between VGA and
BNC monitors.
EXTERNAL MONITORS
(Not Included)
(Not Included)
PRIMARY MONITOR (VGA)
VGA cable
BNC cable
BNC to RCA adapter
To connect the DVR to a
television using RCA cables,
connect a BNC to RCA
adapter (not included) to the
VIDEO OUTPUT port.
BNC cable
8-channel model shown
• ECO Blackbox+ Series Only: the DVR can
simultaneously display the system interface on
monitors connected to the HDMI and VGA ports.
ECO Blackbox+ Series Only: Connect one monitor
to the VGA port and one to the HDMI port to display
the system interface on both monitors.
NOTE: ECO Blackbox+ Series models only
include 1 BNC Video Output port.