Filter
Top Products
46
Using the Main Menu
2 In Client Port, enter the desired Client
Port (default: 9000).
Client Port & HTTP Port fields
NOTE: 9000 is represented as "09000."
3 In HTTP Port, ent
er the desired HTTP Port
(default: 80).
4 Click A
pply to save your settings.
5 Right-click to ex
it all menus. You will be
prompted to restart.
Adjusting Remote Connectivity
Streaming Rates
You can adjust the data streaming rate
(also called the SubStream) when you
connect to the system remotely. If you
want to conserve bandwidth, select a
lower frame rate and bitrate.
NOTE: Sett
ing your system to stream with a
l
ower frame and bitrate may cause
the video to appear choppy or slow.
To adjust the SubStream settings:
1 Cl
ick the SubStream ta
b.
2 Configure the following beside the desired
channel:
• Video
: Sel
ect Enabled or Disabled. If you
select Disabled, you will not be able to view
the channel when connecting remotely to
the system.
• FPS: Select the desired frames per
sec
ond.
• Bitrate/Quality: Select the desired video
bitr
ate.
• Audio:
Select or deselect the checkbox to
enable or disable the system from
streaming audio when viewing the system
remotely.
3 Click Apply
to save your settings.
Setting up Email Notification
The system can send email notifications
when it detects motion.
To set up email notification:
1 Click the Email tab in
the Netw
ork menu.
2 From the Email drop-down menu, select
from:
• Default: Uses the Lorex email server to
send
out alarm notifications. This is the
recommended selection.
• Enable: Uses
custom email server
settings.
• Disable: Disabl
es email notification.