LOREX Technology LH0181011C8F Security Camera User Manual


 
118
Appendix E: Replacing the Hard Drive
Appendix E: Replacing the Hard Drive
The system comes with a pre-installed 3.5" SATA hard drive. You can expand the hard drive
capacity with a single replacement hard drive up to 2 terabyte (TB).
NOTE: It is rec
ommended to use surveillance or security-certified hard drives, which are
designed to be reliable over long periods of time while recording 24/7. Security-certified
hard drives are available at www.lorextechnology.com
Removing the Hard Drive
Make sure that the power cable has been disconnected before changing the
hard drive.
To remove the hard drive:
1 Remove the screws from the side panels (1x per panel) and from the rear panel (x3) of the
cove
r.
2 Gently slide the cover away from the rear panel and lift off. Be careful of sharp edges.
3 Disconnect the power and data cables.
4 Carefully turn the DVR over and loosen the hard drive screws (x4). Do not remove the hard
drive screws or the hard drive will fall and potentially damage the DVR.
Loosen the hard drive
screws.
Do not remove the hard
drive screws