Filter
Top Products
47
Using the Main Menu
If you want to use Lorex’s email server
(recommended):
1 In the Email drop-do
wn menu, select
Default.
Select Default
2 In the Sender Email field, enter the email
address of the sender. This can be any
email address of your choice.
3 In the Rece
iver Email field, enter the
email address you want the DVR to send
alarm notifications to.
4 In the Interval dr
op-down menu, enter the
Duration the DVR must wait before
sending out a new notification.
For example, if you select a 3 minute
inte
rval, the DVR will send out email
notifications every 3 minutes until the DVR
stops detecting motion. The DVR will only
send out notifications when it detects
motion triggers.
5 Click A
pply to save your settings.
If you select "Enable", and want to use
yo
ur own email server:
1 Configure the following:
• SSL: Sel
ect ON/OFF to enable/disable
Secure Socket Layer protocol.
• SMTP Port: Ent
er your SMTP address.
• SMTP Server: E
nter your SMTP Server.
• Sender Email: Enter the
sender email
address. This can be any address of your
choice.
• Sender Passwo
rd: Enter your email
server’s password.
• Receiver Email: Ent
er the recipient’s
email address.
• Interval: Ent
er the interval the DVR waits
before sending a new email notification.
2 Click Appl
y
to save your settings.
Changing the Mobile Connectivity
Port, User Name, and Password
To connect to your DVR using a mobile
device, you must complete the entire
remote setup process described in
“Setting up your DVR for Remote
Connectivity” on page 56.
Use the steps below to change your
Mobile Port o
r the user name and
password used to connect with a mobile
device.
To configure mobile connectivity
settings:
1 Click the Mobil
e tab.
2 If you want to change the user name and
pas
sword used to connect to the DVR using
a mobile device:
• Under User
Name, enter a new user
name. Under Password, enter a new
password.
• By default, the user name is admin and
the pass
word is 0000 to connect with a
mobile device.
3 To change the Mobile port, click the field
beside Mo
bile Port to enter a new port.