Filter
Top Products
60
Setting up your DVR for Remote Connectivity
3 Click Download to download the plug-in for Safari.
Click Download
4 Click the downloads button ( ) on the top-right corner of Safari. Right-click
SurveillanceClient.dmg in the downloads lis
t and select Open. A web plugin folder appears.
Right-click
SurveillanceClient.dmg
and click Open
5 Double-click SurveillanceClient and follow the on-screen instructions to install.
6 Quit Safari (right-click the Safari icon in the
doc
k and select Quit) and then restart
Safari.
Right-click Safari
and click Quit
7 Enter http://, the IP address of the DVR,
colon, and the HTTP port number of the
DVR (e.g. http://192.168.5.118:80) into the
address bar, as shown above.
8 Enter the DVR username and password to log in to the system. By default, the username is
ad
min, and the password is left blank.
Accessing your DVR Remotely over the Internet
Setting up remote connectivity allows you to view your DVR from any computer or
compatible mobile device with Internet access.
NOTE: Ex
cept where noted, the instructions below are the same for PC and Mac.
To set up remote connec
tivity wi
th your DVR, you must:
1 Port forward the HTTP, Client, and Mobile ports (def
ault: 80, 9000, and 1025) on your router
to your DVR’s IP address.
2 Create a DDNS account.
3 Enable DDNS on the DVR.
4 Test the remote connection by entering your DDNS address in a web browser.