Filter
Top Products
86
Remote Viewing Interface
2 Configure the following:
• Channel: Select the channel that
the PTZ camera connects to.
• Protocol: Sel
ect the protocol of the PTZ camera*.
• Baud Rate: Select
the baude rate of the PTZ camera*.
• Data Bit: Sel
ect the data bit rate of the PTZ camera*.
• Stop Bit: Select
the stop bit rate of the PTZ camera*.
• Parity: Sel
ect the parity settings of the PTZ camera*.
• Cruise: Sel
ect Enable or Disable*.
• Address: Select the address of the PTZ camera*.
*Consult th
e PTZ camera’s instruction manual for protocol and configuration details
3 Click Sav
e to apply your settings.
Configuring the System Time and Date
To configure the system time and date:
1 Click the Remote Setting t
ab, and click System>General.
2 Configure the system format and time:
• System Time: Enter the desired system time and date. An on-screen calendar appears when
yo
u click the date.
• Date Format:
Select the desired format the date is displayed in.
• Time Format:
Select between 12 hour or 24 hour time formats.
3 Select DST t
o enable daylight savings time, or NTP to sync the time with a NTP time server.
NOTE: Using the
NTP feature requires that your DVR have a constant Internet connection.
Changing the System’s Menu Time Out
To change the system’s time out menu:
1 Click the Remote Setting t
ab, and click System>General.
2 In the Menu Timeout drop-do
wn menu, select the duration the menu stays on screen before
disappearing.
3 Click Sav
e to apply your changes.