Filter
Top Products
113
Appendix B: Connecting a PTZ Camera
3 Configure the following according to your PTZ
camera’s specifications:
• Channel: Select the channel the PTZ camera
is connected to.
• Protocol: Sel
ect from Pelco-D or Pelco-P
• Baud rate:
Select the PTZ camera’s baud
rate
• Data Bit: Sel
ect from 5~8 data bits.
• Stop Bit: Select
from 1 or 2 stop bits.
• Parity: Sel
ect from None, Odd, Even, Mark
or Space.
• Cruise: Sel
ect Enable to enable PTZ cruise.
• Address: Enter the PTZ camera’s address
Use the Copy To
drop-down menu to copy the
PTZ sett
ings to multiple channels.
4 Click A
pply to save your settings.
Using the PTZ Menu (Local DVR)
To control the PTZ camera locally on your DVR:
1 Select the channel that the PTZ camera is connected to.
2 Right-click and press the PTZ button (
). Enter the system password. The PTZ menu
opens.
3 Use the on-screen PTZ controls to control the camera.
Channel:
Select the channel the PTZ
camera connects to.
Click the + and - symbols to
adjust the camera Zoom,
Focus and Iris settings
Direction keys:
Click to pan and tilt the camera
Speed Slider:
Increase or decrease the pan and tilt
speed
Camera Pre-set
controls