Filter
Top Products
With SB-50DX/SB-28/SB-28DX/SB-27/SB-26/SB-25
111
Lens Metering system
Exposure mode
Programmed and Aperture-Priority
Shutter-Priority Auto Auto
Manual
D-type AF Nikkor lens,
3D Color Matrix
3D Multi-Sensor Balanced Fill-Flash
G-type AF Nikkor lens, Center-Weighted
AF-S and AF-I Nikkor lens
Spot Standard TTL flash
Non-D/G-type AF Nikkor lens
Matrix
Multi-Sensor Balanced Fill-Flash
(except for AF Nikkor for F3AF) Center-Weighted
and AI-P-Nikkor lens
Spot Standard TTL flash
Matrix
3D Multi-Sensor
PC Micro-Nikkor 85mm f/2.8D
*1
Center-Weighted —
Balanced Fill-Flash
Spot Standard TTL flash
Other lenses
Matrix Center-Weighted Fill-Flash
*2
Center-Weighted Fill-Flash
*3
(or with accessories)
Center-Weighted Center-Weighted Fill-Flash
*4
Center-Weighted Fill-Flash
Spot Standard TTL flash
*1 The camera’s exposure metering and flash control system do not work properly when shifting and/or tilting the lens, or when using an
aperture other than the maximum aperture.
*2 Metering system and exposure mode automatically switch to Center-Weighted and Aperture-Priority Auto, respectively.
*3 Metering system automatically switches to Center-Weighted.
*4 Exposure mode automatically switches to Aperture-Priority Auto.
•In the Speedlight’s LCD readout, ˆ and ¬ appear for Automatic Balanced Fill-Flash with TTL Multi
Sensor, ˆ and Ø appear for Center-Weighted Fill-Flash.
•By pressing the Speedlight’s M button (or MODE button with the SB-50DX/SB-28/28DX), you can cancel
Automatic Balanced Fill-Flash control to perform standard TTL flash operation. For standard TTL flash,
the Speedlight’s LCD panel shows ˆ without ¬/Ø. For details, see the Speedlight manual.
P400 (E) 02.12.27 6:42 PM Page 111