Filter
Top Products
68
FLEXIBLE PROGRAM
To change the shutter speed/aperture combination in
Programmed Auto exposure mode, use the Flexible Program
function. Flexible Program lets you temporarily change an auto-
matically set shutter speed/aperture combination in 1/3 EV
steps, while maintaining the same or consistent exposure.
Flexible Program function can also be used with any Nikon
Speedlight. Note that selectable shutter speeds are limited to
those below the sync speed of the Speedlight. When perform-
ing flash photography, however, you cannot shift to a shutter
speed faster than 1/250 sec. (Changeable to 1/300 sec. with
Custom Setting.)
1
Make sure Programmed Auto exposure mode (¡) is
selected, and lightly press the shutter release button.
Shutter speed and aperture appear in the top LCD and
viewfinder.
P400 (E) 02.12.27 6:42 PM Page 68